Today, we looked at the FSL backlighting products.
From the component (permanent installation) we looked at:
- Slim Panel
- Net Light
- Chain (wet location solution and unusual shapes)
The NET Light:
An LED system suitbale for back lighting. It can be place behind a variety of diffusers like; glass panel, colored and textured resin, graphic and image panels.
- Low voltage
- variable wattages, changing from 4w to 14w per ft
- LED Nodes are spaced 24mm apart on board.
- 3000K up to 6500K.
- Require 3" to 5" spacing in a cavity.
The Slim Panel:
A 1/2" thick edge-lit slim profile. It can be placed right on top of the application and suitable for tight spacing. (when the 4" to 5" spacing is not available)
- 4w/ft (standard) and 5w/ft (RGB).
- Available with LEDs along 1, 2, or 4 sides of perimeter.
- Available in static, RGB and tunable white.
- The largest size is 4' x 8'
The Chain:
An LED channel module in 25' trays of 50 LED modules. It is ideal for organic shapes and letter backlighting.
- 2.4w/ft with 252lm/ft (standard) and 1.4w/ft (RGB).
- 3000K, 5000K, and 6500K.
- Available in static white, RGB white.
- Available as double sided.
From the backlighting complete solution we looked at:
Frame Light:
A changeable 3D printed diffuser paired with slim panel. (suitable for signage)
- 4w/ft (standard) and 5w/ft (RGB).
- frameless or custom frame option with reveal trim on "Snap Framelight".
- 3000K up to 5300K
Jawn Light:
Wall and ceiling surface mount with edg-lit LED panel and white diffuser
- variety of shapes. (4' x 8' max size for single sheet)
- Compatible with individually addressable DMX
- Available in Dynamic-W, Static-W, and RGB.
Luminous Ceiling and Wall:
A stretched fabric with back lighting system with a custom image and different color temperatures. (the transparency can be adjusted between 50% to 70%)