Vode Lighting specializes in small scale LED extrusions. They stopped by our office to give us a closer look at the extrusions they offer. For most of their fixtures, they are available as a 2' fixture with 1' increments up to 6'. They all require remote drivers, with standard dimming to 1% and can be provided with 0.1% dimming for an adder. The driver can be located up to 72' away. An interesting feature to Vode's fixture is that they are all made from recycled aluminum. There are two LED boards with LEDs from Nichia. The zipper board is a tightly spaced LED board for even illumination. The button board has a wider spacing and is used with optics.
The Zip 1 was originally designed with a slim profile perfect for undercabinet installations. It features a glowing side on the diffuser to push light onto the back of the vertical surface. It can be installed with magnets or tape.
The Zip 2 takes the Zip 1 form factor and includes lens accessories to customize the fixture including a glowing lens extrusion and an aluminum extrusion with a lens on the bottom. There is also a mounting clip that allows you to mount to the bottom of the t-bar ceiling structure with either a flat diffuse lens or an asymmetric lens.
Zip 3 is a wall mounted fixture that is designed to be a direct/indirect distribution. There is a bracket for new construction that allows for a trimless installation, and a surface bracket for existing or wood surfaces. The mounting height and the width of the fixture actually block the surface bracket from view.