Illumination WALD STUDIO

26Oct/180

CORONET POP-UP SHOWROOM

Today, we visited the Coronet's Pop-up showroom in Chelsea.

 

Dimension

  • The fixture can be expanded or inverted by 2” to 4" on the center within the same fixture run. (fixtures joints by molding)
  • Available in 8' and 12' lengths.
  • This fixture can also be bi-directional.

LS3 Extrusion

  • Tunable white 2700K to 5000K with intensity control. (New!)
  • They have a vertical light blocker and are working on a magnetic system to pull fixtures together.
  • They are considering improving the lens (male, female sliding to each other), overlapping, taping on the back (been proposed) since currently gaps can be seen between adjacent lenses.

Fuego

  • This fixture cannot be physically modified.
  • The CCT and stem length can be modified however.
  • It is standard 0-10v.

PIER LED UPDN

  • Available in Bi-directional, recessed, and surface mounting.
  • It has an integral driver
  • The LS3 is bi-directional, LS1 is single direction (direct).
  • A highlight of this fixture is that it is heavily modifiable, not so costly.

Wave

  • This fixture looks very similar to the Vibia fixture. However, this fixture does not pivot.
  • It is made of aluminum and has a drop acrylic lens.
  • It has an integral driver
  • Can be single or bi-directional.
  • The center spine could be longer but the fixture lens cannot.

Loopita

  • The vacuum formed plastic lens makes the ring seamless.
  • Available in matte, gloss, semi-gloss, and flat finishes.
  • The tape is right on top of the fixture.
  • It has a central axis canopy (flat canopy available as well).
  • It does have some uplight.
  • Up to 5’ diameter.

Magnetic Track System

 

  • A 3 circuit, 24V, magnetic rail, robust system with 0-10 dimming.
    • The largest load is 96 watt/circuit. They are looking to increase the sizing and higher temp standard for CA requirements.
  • The recessed track head is new! It started 10/2018.
  • 17° to 33° optics on this 450 LED track head
  • There is an increment restriction of 11” on baffle and 6” on the linear system.
  • Downward and upward lens.
  • Limited in finish options.
  • Can be in provided with a higher light output.
  • It is 30 to 40% less expensive than the competitive systems.
  • The recessed track system will be out in December 2018
  • There are three optics available in the track head and it has a 350 Lumen output. A higher output track head is coming. It is dimmable via 0-10v.
  • Flanged and Flangeless track is available.

Rush Sharp

  

  • Available in 30° and 50° optics. The 50° is a little shallower.
  • This is 30 deg. Bi-directional. It has separate circuits and requires a remote driver.
  • The continuous run require double mounting cables
  • The longest run with single mounting point line cable is 8ft.

50° optic shown above.


This is the brighter version of the part of the Loopita series.

 

  • Available in 18", 3’, 4’, and 5’ sizes.
  • Soft curved, seamless form, RGB color.
  • Cost effective.
  • Top lit, 20% uplight contribution.
  • Acoustic panel on top as an addition is coming soon!

The Wall grazer, part of the PG4 Series.

 

We liked the grazing!

  • What we also noticed was the optic is a little greenish. Perhaps because of the silicon lens!
  • As it can be seen in this photo, the light is located 4”-5” away from the wall which causes a nice 15° light distribution on the floor.

Square Series

  • The illuminated dropped lens can be popped up too for indirect lighting

CURVED LS SERIES:

  • 30° and 45° radius curve.
  • It comes as direct/indirect as well.

  • NOTE:
    They are using Osram, Samsung LED chips for round fixtures
  • Cree LED chips are used in linear systems and the track heads.
  • Their facility allows for the max cutting length of 12’ run.
  • For 2019, they are considering more sconces and wet location linear lights.
Comments (0) Trackbacks (0)

No comments yet.


Leave a comment

No trackbacks yet.

Follow on Feedly