Illumination WALD STUDIO

23May/180

XAL Showroom

At the new XAL showroom, they presented the new commodity and boutique products.

Under the Commodity products we saw the Vela, Mino 2.5 and Baso family.

Vela Evo was launched globally in 2017 in 3 sizes of 1.5', 2', 3' and 4' diameter. The 1.5' model is priced at $540 and goes up to $5000 for 4' version which can be used even as a high bay architectural fixture due to high lumen output.

What is unique about this fixture is the double sided printed led board, for uplight. Currently, the standard color temperatures although the tuneable white is under development for European market, it is available in both tuneable and RGB for US market.

In the surface mounting installation the gap between the cone shape housing on the back of the fixture and the ceiling is just 1 inch and wont be noticed even when looked closely.


The BASO family is another product which we looked at. It is exclusively available in US market and comes in 1.5", 2.5" and 4"  wide recessed extruded aluminum profile, trimless or with trim. The Wallwasher  version has 1.5 aperture, snap-in lens, 3500K and 4500K available. It is also customization for larger projects and quoted around $90/ft. The board and cover are integrated and use snap system to be placed to the channel, aluminium board to help the heat transition. It also has the wall to wall configuration.

 

The Baso Cove is coming on August 2018 in 3.5" and 4" aperture. It also benefits from snap-in system to be used in trimed and trimless shape in wood ceiling.


Later they showcased the Task system and Move It system which belong to their boutique products line.

The Task acoustic is an office lighting. It is an edgeLed product in 4', 8' sections, 2'x2' corner and curved corner. They recently launched acoustical panels made out of PVD  to reduce noise. It is designed in an inlay and single mount to go with the fixture in half circle or half square shapes based on fixture shape.


The Task System is another Edge lighting product in this family. It comes in 4', 8', 12' sections and 2'x2' corner which also comes as wall mounted.  There is a linear connector between each fixture. The driver is in the first 3 set to keep the board temperature down. The optic is in 4 layers to achieve low glare. There is also an extra set of LED on the back of channel to achieve the asymmetric distribution. The ratio of direct/indirect could be between 60% to 40% and 30% to 70%  uplight. The direct/indirect lighting are controlled together (no separate dimming). Suspension head and wall to wall option are also available for this fixture. The quoted price is around $100/ft.

 


Their other boutique product is the Move It System. It is a magnetic track system with 1" or 2" wide suspended extruded profile channel and various inset options like; spotlight, linear light and pendent recessed light and uplight which are flexible and adjustable. The spotlight has an adjustable beam angle of 17° to 43°.

The Move It system can Also be used as a wall-washer. It comes in 1', 4' and could have spotlights on the track which are non-current dimmable (12V). There are also Opals for 1' and 2' channels. Currently, the ends are glowing but they are considering to develop a non-glowing end. The snap-in system also reduces the errors of a contractor in case of the reverse installation. The channel can be used in the architectural cove. For using grazer as a cove light, only 6" spacing is required for shooting the light. They are developing a half channel in 2018 to be used instead of an architectural cove.

 

Digital dimming can be used for downlights on this system and Dali for individual track heads (700 lm to 1200 lm). They are currently looking to work with US control system manufacturers to make their controls compatible with this line.

From the Move It family, the Move It 25 with multi connector node is a unique outstanding magnetic lighting system. It can be ordered as a standard parts from the cut sheet. The end cap is a around unit which is power feeder with electric connectors, remote driver, 24 constant voltage. Each power feeder can takes 6 arms (channel is not cuttable. It has magnetic part.) with possibility of rotation for each arm to achieve the desired angle. It is a time consuming and expensive fixture, since it needs a lot of customization and communication.


And finally, they presented their newest creation, UNICO.

It gives a total control and flexibility over the light shape. They achieved a very narrow 12° spot, 35° round or square spot,  55° and 75° flood light, wall washer and symmetric/asymmetric light distribution all in one fixture. It has 2 mounting option, 6 design shapes, 9 light insets (up to 420 lm each) and three control options which can be individually combined.

 

Comments (0) Trackbacks (0)

No comments yet.


Leave a comment

No trackbacks yet.

Follow on Feedly