Illumination WALD STUDIO

28Aug/190

Goldeneye

Today, Goldeneye visited our office.

Goldeneye is based in California and does most of their manufacturing there. Their LEDs are made in Korea.

They specialize in ceramic LED boards with 5mm LEDs where the metal conductor is silkscreened on. Almost all of their products are red list free.

All of their fixtures are low voltage and come in 2700K-4000K CCT. The fixtures are constant voltage and the driver can be tuned down if needed.

The line is made in T-Grid widths and can be physically mounted to a T-Grid. However, they also have products with mounting for pendants or undercabinet. The undercabinet fixture is magnetic based.

24 linear feet  of the 1/2" product can be on a single 100w driver. 16 linear feet linear feet of the 1" product. Fixtures can be cut in 6" increments. 

Fixtures with silicone diffusors and ceramic recessed downlight tiles are also available.


The ceramic LED boards are moisture and damp listed. They are also UL certified and can be embedded in any material. They can be cleaned with any commercial detergent.

Bus bar style in the next generation- no wires!

13Jun/190

ONE A – STORM SYSTEM

Today, One A visited our office to show us their product line.
One A is based in Denmark. It is a primarily residentially focused line.

The concept of the One A  Strom System product line is that everything fits into one pre-construction piece. This piece can then be used to recess in a gypsum ceiling, millwork, or it can be surface mounted.

  • Bronze
  • Brass
  • Nickle
  • Silver
  • Gold

Millwork fixtures only come in three finishes- white, black, or grey.

One A tends to use Zaniboni housings for their fixtures. All DLs are compatible with SORAA light engines. Standard Adjustable with driver and housing is approximately $350 DN.

They also have a recessed lamp socket and a pendant connection that supports up to 20 lbs.

One A also works with Backlight so that any of the Storm system components can be embedded into a Backlight panel. This includes downlights, adjustable fixtures, dropped lenses, and more.

The system is looking to be listed by the End of July.

Here are a few more of the products that were shown:

 

Speaker
Illuminated Towel Hook
Step/ Path Light

 

Solid Brass

Table Lamp- Small is 12-hour charge, large is a 24-hour charge. Available with warm dimming.

22May/190

LIGTHFAIR 2019

ACCLAIM:

We liked the dome series.

 

ACCORD:

15 days lead time. Made in Brazil.

\

AION:

0.5 inch by 0.5 is the smallest channel with screws in the end-cap. It goes down to 1/4" increments and over 8ft is available as one piece.

3/8” wide 800lm/ft 30, 40, 60,80 degree optic available. Node free on full and mid. Minimal visible node on a low level.

1/4” deep, 400lm/ft, node free

Variety of channels, walk over mud-in closet rods, shelves, recessed and surface mount all available.

AVENET:

Cool looking pendant.

BASELITE:

We liked the finish and textures that look like ceramic.

B-K LIGHTING:

Liked the new finish.

 

DAY TIME:

Interesting looking light panels.

 

DECORS:

Round fixture looked good. Acrylic all around.

 

ECOSENSE:

New ELV Dimming. 3 and 3.5”

  • Fixed and adjustable wet location fixture.
  • upgradable to tunable, Bluetooth controllable.
  • Field replaceable optics

 

ELLIPTIPAR/TAMBIENT:

New sconces and wall washers were shown.

 

KUZCO:

We really liked the forms and designs.

 

Interesting glass wet listed sconce:

 

LIGMAN:

 

 

LUCIFER:

48v tracks recessed, trim and trimless

Step lights:

LUMIUM:

Wood finishes for linear and new profiles:

New slim direct/indirect pendant mounted fixture. Lumium also had a new pendant mounted oval fixture.

 

MODERN FORMS:

Lightstick is a nice looking dropped lens fixture. Probably a good option for vanity lighting. But it's only available in 3000K.

 

MP LIGHTING:

Good Mono-point options.

NEOLIUM SMART:

 

OXYGEN:

Another lensed linear option but available only in 3000K.

PHILIPS/SIGNIFY:

Liked the mounting options.

PICASSO LIGHTING:

Had a nice wrap around lens.

SONNEMAN:

STRUCTURA:

 

VLT:

Custom fixture attached to hardware. Direct/ back light to a cove.

Globe mounting bracket for the light available as a pendant too! Globe, in the ground, spotlight.

  • General 5-6 weeks lead time
  • Linear products are made to order.
  • Different lenses, opacity, remote power supply.
  • A great option for shelf lighting, available in warm white and grazing.

Brand new step light, Corian face plate different colors, interior rated, different shapes, junction box with internal driver.

 

WAC LIGHTING:

 

 

 

 

6May/190

Basalte Home Automation System

Today, Basalte stopped by our office for the first time to present their Switches.

We looked at the SENTIDO family which are multi-touch sensitive programmable light switches. The switches are available as dual button or four button.

  • They also have a motion sensor that is available in a white or black finish.
  • Compatible with Crestron and Lutron systems.
  • All of their products can be flush mounted.
  • Available in different finishes.

Integrated temperature sensor for thermostats,  and programmable multi-color LED (shown below on the right).

They also make a step light (shown above on the left). However, this step light currently only comes in a cooler CCT.

2May/190

BOVER and DADO

Today, Bover and Dado visited the office to show us some of their new products. 

BOVER

Bover stocks product in Atlanta. Bover gave us a quick run down of many of their fixtures as shown below:

Garota: A fixture with synthetic wicker material. This fixture comes with a catenary option in which up to 4 fixtures can be on a catenary system (although if more is needed, consult them).

Tria: Decorative sconce that comes in a teak or metal finish.

Mediterrania: A large decorative ribbon pendant fixture. $1600 DN

Also have essentially a track system. Catenary version of this. Custom finish of metals.

Mod: A decorative pendant fixture with a custimzable amount of panels. The panels can be made in many different ways depending on the material including: laser cut panels, acoustic felt panels, or crocheted panels

Drip and Drop: Can be a pendant in many different configurations, or a table lamp (that can come with a USB on the plate). Up to 48 pieces can be on one pendant fixture.

Domita: A small pendant version of the Dome fixture, this consists of thin laser cut wood panels configured in a dome shape. Up to 40 on one canopy.


DADO

The Tick-tack is a linear fixture, available as a one-sided or 2 sided LED, priced under $100/ft including the remote driver. This fixture is offered with standard and T-grid mounting.

They use 3D printed end caps to run the linear light end to end on a surface.

  • What we liked was the fixture running seamlessly without visible joints and optional butt joint connection.
  • End shape on the recessed fixture is available in shapes other than straight.
  • Field cuttable extrusion allows the contractor to cut the aluminium housing and lens in the field and then send back to the factory to insert the LED strip which allow a nice and clean installation.
  • The 9.5W and higher models require aluminium backing for heatsink purpose.

Tick-Tack is their new product. The TW3 family fixture is 3/8" thick is a great option for mirror lighting.

   
Follow on Feedly