Illumination WALD STUDIO

28Aug/190

Goldeneye

Today, Goldeneye visited our office.

Goldeneye is based in California and does most of their manufacturing there. Their LEDs are made in Korea.

They specialize in ceramic LED boards with 5mm LEDs where the metal conductor is silkscreened on. Almost all of their products are red list free.

All of their fixtures are low voltage and come in 2700K-4000K CCT. The fixtures are constant voltage and the driver can be tuned down if needed.

The line is made in T-Grid widths and can be physically mounted to a T-Grid. However, they also have products with mounting for pendants or undercabinet. The undercabinet fixture is magnetic based.

24 linear feet  of the 1/2" product can be on a single 100w driver. 16 linear feet linear feet of the 1" product. Fixtures can be cut in 6" increments. 

Fixtures with silicone diffusors and ceramic recessed downlight tiles are also available.


The ceramic LED boards are moisture and damp listed. They are also UL certified and can be embedded in any material. They can be cleaned with any commercial detergent.

Bus bar style in the next generation- no wires!

22May/190

LIGTHFAIR 2019

ACCLAIM:

We liked the dome series.

 

ACCORD:

15 days lead time. Made in Brazil.

\

AION:

0.5 inch by 0.5 is the smallest channel with screws in the end-cap. It goes down to 1/4" increments and over 8ft is available as one piece.

3/8” wide 800lm/ft 30, 40, 60,80 degree optic available. Node free on full and mid. Minimal visible node on a low level.

1/4” deep, 400lm/ft, node free

Variety of channels, walk over mud-in closet rods, shelves, recessed and surface mount all available.

AVENET:

Cool looking pendant.

BASELITE:

We liked the finish and textures that look like ceramic.

B-K LIGHTING:

Liked the new finish.

 

DAY TIME:

Interesting looking light panels.

 

DECORS:

Round fixture looked good. Acrylic all around.

 

ECOSENSE:

New ELV Dimming. 3 and 3.5”

  • Fixed and adjustable wet location fixture.
  • upgradable to tunable, Bluetooth controllable.
  • Field replaceable optics

 

ELLIPTIPAR/TAMBIENT:

New sconces and wall washers were shown.

 

KUZCO:

We really liked the forms and designs.

 

Interesting glass wet listed sconce:

 

LIGMAN:

 

 

LUCIFER:

48v tracks recessed, trim and trimless

Step lights:

LUMIUM:

Wood finishes for linear and new profiles:

New slim direct/indirect pendant mounted fixture. Lumium also had a new pendant mounted oval fixture.

 

MODERN FORMS:

Lightstick is a nice looking dropped lens fixture. Probably a good option for vanity lighting. But it's only available in 3000K.

 

MP LIGHTING:

Good Mono-point options.

NEOLIUM SMART:

 

OXYGEN:

Another lensed linear option but available only in 3000K.

PHILIPS/SIGNIFY:

Liked the mounting options.

PICASSO LIGHTING:

Had a nice wrap around lens.

SONNEMAN:

STRUCTURA:

 

VLT:

Custom fixture attached to hardware. Direct/ back light to a cove.

Globe mounting bracket for the light available as a pendant too! Globe, in the ground, spotlight.

  • General 5-6 weeks lead time
  • Linear products are made to order.
  • Different lenses, opacity, remote power supply.
  • A great option for shelf lighting, available in warm white and grazing.

Brand new step light, Corian face plate different colors, interior rated, different shapes, junction box with internal driver.

 

WAC LIGHTING:

 

 

 

 

13Mar/190

LEDucation


SDA

CORONET:

  • New Black Lens so fixtures are quieter looking (50% LLF)

DAY-O-LIGHT:

DESIGN PLAN:

  • Now has IP69K rated fixtures (which are rated for power washing)

ECOSENSE:

  • New LORE downlight
  • Interchangeable optics (beam spread) the modular with
    10°, 20°, 60°, and pinhole options.
  • Now also owns Lumium
    • $70 DN for bracket fixture

ERCO:

Right side: Standard wall-washer
Left side: Wall-washer for a high ceiling.
  • They use the OSRAM LED chips with 97+ CRI
  • Rearranged LED chips to achieve a round beam spread
  • New Atrium downlight for high ceiling available as up/down distribution. It offers a quit ceiling.

Zoom fixture: 70° to 15°, also available in oval shape beam spread from 7°.

FENG SHUI LIGHTING:

FORMA:

  • Works with Cassambi

HEVI-LITE:

  • Single diode instead of triple diode now
  • Acrylic fixture has stake mount and pendant mounting options and comes in smaller sizes. Can customize the size of the diffuser.

H.E. WILLIAMS:

INTENSE:

LEDCONN:

  • Luxflux
    • Field cuttable
  • Backlighting
    • 1.5” spacing from acrylic

LIGHTGLASS:

  • Mimicks daylight
  • Cannot see through it

LITELAB:

  • Next Gen cylinder and track available now

LUMENPULSE:

  • There are new mounting brackets and visors available for the Lumenfacade fixtures

LUMINII:

  • Now have High-Efficacy options
  • Part of leader brands: also available in 16".
  • Matrix and Matrix Plus
    • Come in 12x12 or 2x12 options
    • 134lm/w, back lighting solution 2x12

MARK ARCHITECTURAL:

  • Chisel Fixture
    • Comes in Warm Dim, Statics White, or Tunable White
    • $300 DN for tunable white fixture

MODERN FORMS:

  • They also have ceiling fans

NOVA FLEX:

  • 1-inch pinch custom size up, up to 4 ft
  • Nova flex is a great option for low cost and acceptable quality fixtures.

SELUX:

  • The hex cut around 45% of light
  • Available in different configurations as down, up, and up/down.

USAI:

  • New sloped ceiling options
  • 6.5” housing options
  • New Armstrong ceiling tile fixture

US ARCHITECTURAL LIGHTING SUN VALLEY:

  • Good heat dissipation

WE-EF:

  • New post tops

LIGHTS ON WEST

B LIGHT:

LEDNER:

LUMENTRUSS:

  • Pre-made coves
  • Wooden fixtures

LOUPI:

  • 24V Track

ONE A:

  • One mounting ring that fits everything
  • Interior Only
  • Back mounted ring for millwork
  • Remote drivers that dim to 1%
  • Using SORAA
  • Higher price point

STENG:

  • New picture/Art Light

DULANSKI

NUMBER 8:

  • The new 200 series with competitive pricing (under $200), more output compared to 400 series coming in July.
    • mud in option comes soon (5 to 6 months).
    • Color tuning coming soon in all series (2 to 3 months).
    • $180fix + $20 extra for warm dim 30° adjustability, over 18 different optics.
    • IC housing is $20 adder.
    • Color tuning is around $50 adder.
    • Soraa lamping
    • 2.5 inch deep, a solite lens, wet location.
    • Luminet lens glass with optical potential for linear spread.

PRUDENTIAL:

  • Can light a whole ceiling and is clear when off

SCOUT LIGHTING:

  • 0-10V Dimmable
  • Cuttable to the inch
  • Comes pre-assembled
  • $40 DN/ft.
  • Have a 10 x 60 Grazer

O'BLANEY RINKER

BACKLIGHTING SOLUTIONS- EVOLITE:

  • Lattice
    • Screwed in rather than tension mount like TLS
  • Origami
    • Can lay things right on it
    • IP65 Rated (maintains rating when cut)
    • 866 lumens/sq. ft.
    • 12W/sheet

DADO LIGHTING:


Smallest is 6" but they can do a longer one.
  • Braille printed on the lens

EKLIPSE:

  • New Cipher System (fall product)
  • Adjustable every inch
  • Depth less than 3/8” required

LUCENT:

  • Beam control expanded the range in added sizes.
  • Mini800 lm
  • Micro 550lm ( good for display lighting)
  • Snap-in track
  • Dali- 0-10 lutron
  • A new range of LED module
  • warm dim and tunable white
  • chip onboard
  • 0-10V, EcoSystem, and Dali controls.
  • Down to 2000k on 1%
  • The mini trim cut the price and make it a competitive option

OPTIC ARTS:

  • New flexible outdoor FOT options (what does FOT mean?)
  • New fully flat lens

ROSCO:

  • New Optisculpt line

ELS

A LIGHT:

  • Available in 24" and 38" diameters. 8500lm for 38" model.
  • Remote driver in the canopy.
  • There are lines on the shiny finished surface but having a matt finish prevents that.

A fixture made out of nonorganic material (no mold). It is cleanable, vacuumable, recyclable, and printable.

PURE EDGE:

The 24v track heads also available in the warm dim.

TLS:


PYRAMID LIGHTING:

NERI:

Exterior fixture made from concrete fiberglass.

It has a nice horizontal distribution. Built based on the Florida code requirement. available with switching between amber color and standard white.

There is no shadow of the bracket on the surrounding. The blade part can be used to have signage and pattern since the light is thrown out from sides.


ELA

3G LIGHTING:

In RMZ Series the 2 micro LED is around $150 and $250 for 4 micro LED models. Available in timeless with integral driver recessed option

DL33R Downlight: Right side can be considered as an efficient fully adjustable/ flush option around $150 to $175.

AURORA LIGHT :

  • Symmetric and asymmetry distributions.
  • New wood bollard
  • New 3w basic flood light interchangeable optic no accessory, available in 15 20 40 50 degree optics. Using new silicon lens offer 15% optical output comparing to acrylic.
  • Walli family now have wall-washer option,110 degree 120 and 130 degree optic
  • They stoped sainless steel finish and intrediuced new PVD black finish

LF ILLUMINATION:


SLS

FLUXWERX:

FOCAL POINT:

  • Skydome is an edge-lit fixture with optional uplight.
  • The pendant mount comes with separate control for up and down individually .
  • available in 2',3', and 4' (18000lm) diameters.

SORAA:

4Dec/180

PreciseLED

PreciseLED is new to ELA. They are located on Long Island.

 

ZENLITE

Zenlite is an in-wall product that goes over the joists and is in line with gypsum. The mudplate is made out of PVC. This is advantageous because the PVC doesn't retain heat. The fixture can be installed with or without the lens in. The lens is laser cut and pre-installed before shipping so on the site, they just need to peel off the protective tape. The LED strip is typically installed beforehand.

Available in 1" and 2" versions.

It costs around $48/ft (DN price).

  

ARC:

The curvable extrusion with a flexible lens. The 15°  radius is the tightest they can go. The curved product is edge-lit (2 LED strips facing each other) with a silicone lens.

Zenlight tile also exists. The lens is poured into place. You can walk or drive on the Zenlight tile fixture.

  

The maximum running length is 100ft.

It costs around $100/ft (DN price).

They also have an asymmetric Zenlite as well.

*the straight and the curve products are using different LED chips and won't be mixed.


DOWNLIGHTS:

The downlights available as trimmed and trimless with IC and Non-IC rated housings, 45° tilt and 360° rotation, and interchangeable lenses.

The Novation is their new 3" downlight/wallwasher . It has one of the shallowest air-tight housing on the market, 18" X 2.44", an interchangeable adjustable downlight and wallwasher lens. The housing has a unique copper piece which acts as a heatsink and therefore allows the housing to be this shallow.

  

*The shallow housing has only 30° tilt adjustment.

*They use CREE LED chip. The LED head is screwed-in and field replaceable (great for changing CCT).

*The trimmed fixture is shower rated.

They do not currently have a trimless option for millwork fixtures but they are currently working on it.

*They do have their own line of drivers but their products work with others as well.

Their wallwasher has an interesting lens design.

It's good to keep in mind, the piece with get really hard and make it difficult for on-site optic adjustment (there is a very tight space to access the clip for adjustments).


DIM TO WARM TAPE:

We also looked at their dim to warm tape. This tape has alternating chips to achieve the desired effect. All of PreciseLED's tapes are a minimum of 90 CRI.


 

UNDER CABINET FIXTURES:

They also have a line of interesting under cabinet fixtures called LUMAMATE.

The system has 90° vertical, 90° horizontal joint connector, motion sensor, on/off switch and dimmer switch all in on.

*The touch dimming, step dimming by tapping worked really smoothly.

They started with the larger size and have evolved to a smaller sized fixture with the same capabilities. The smaller fixture is not yet online or in the catalog but is coming soon.

  • Available in 2700K, 3000K, 3500K, and 4000K.
  • Available in 90CRI (standard) and 95CRI.
  • 45° clip and flush clip are available for mounting.
31Oct/180

Airey Thompson

Today we had Airey Thompson visit our office. Airey Thompson is a California based company that uses locally sourced materials.

We looked at their 13L and 62L series.

The 13L is their under cabinet fixture with an extruded aluminum body. The fixture is made with Samsung chips LED line voltage with lots of dimming options. Typically hardwired without conduit. Everything is made to order and has a 2 week lead time.

Lots of customization is available. You can get any length. It is 123 Lumens/Watt. 2700K is an option. It is a modular fixture. They have an outlet on them to plug stuff into it. Polycarbonate lens* on the linear fixture which is great for stairwells.

The 62L series is an architectural grad linear LED  suitable for office spaces, overhead, stairway and hospitality spaces. It's available in surface and cable suspended mounting. The Battery backup can be added on 3' and longer lengths.

They are in process of a smaller fixture and a tunable white fixture so those will be coming soon.

*Their new line has an acrylic lens. It is 124 Lumens/Watt and higher efficiency.


*They have an MRI compliant under cabinet and cove light.

*They also make marquee lights that can have an exterior rated socket.

   
Follow on Feedly