Illumination WALD STUDIO

4Dec/190

Prizm

Today Prizm lighting visited the office to show us their new products.

They are a new division of American Lighting. They are mostly focused on RGB with DMX control system.

 

Pixel Cubes

 

This fixture comes in IP67 rated cubes, each with X3 sections which are individually addressable through DMX. 4 channels to control colors.

Available in Gold and Silver finishes as standard. Additional powder coated finishes are available.

Power and data cables

pass through one cube to the other.

Up to 18 cubes on the power cable and 40 cubes on a DMX.

The DN price is $125, just for the cube.

 

Pixel Dots

RGB-W with adjustable 3" to 4" spacing between the dots.

The white CCT used at the center of the diode is exchangeable for different CCTs.

The lensing is an option, available in flat clear, flat white, and dome white.

The LED chip without lensing is IP67.

The cable comes in black and white finishes.

The cable could be replaced with X2 rows of uncrafted cable

 

NEOFLUX RGB:

Flexible Neon:

An IP 67 rated RGB twistable Neon LED with rigid or flexible mounting clips.

Available with end or back-feeding.

4" cutting increment in RGB and 2" cutting increment for the single color.

End caps could be installed at the job site and LED is field-cuttable with fully lit ends.

Max running length of 16'-0" per single unit.

up to 32'-0" run per each power supply.

Priced around $20/ft

 

TAPE LIGHT:

5.5w/ft, IP67, individual optics with permanent lenses.

Available beam spreads are 10°, 30°, 40°, and 30°X70°.

Max run length is 32'-0".

The RGBw coming soon.

This tape doesn't come with a channel but they have a wide low profile which could be used with it.

Lead time for custom products is 6weeks for production (overseas) and 1-2 weeks for delivery.

 

25Nov/190

Insight

Today, Insight Lighting visited the office.

C5X Linear WW

  • Board is at a diagonal
  • Powered aircraft cable
  • Micro Louver option
  • Surface, Pendant, or Extended arms mounting options. Extended arms come in 6", 12", 18", 24" options.
  • 15W version is shown
  • 17.5 degree beam
  • Nice lateral cut off
  • Traditional J-Box, Canopy, or in Wall for mounting.
  • 2'-8' lengths in 1' increments
  • 27K-4K


Pilot Family (Interior cove and grazing; exterior grazing)

 

Pilot AC

  • Cove Tape Replacement Option
  • 1' and 4' module lengths
  • 120V
  • ELV Dimming only
  • $36/FT for 4W option
  • On board power supply
  • 4W and 5W (higher options?)
  • 0-10V Dimming (direct to control source)
  • Line voltage
  • RGBW Quad CREE Chip for color changing
  • 12W/FT Color changing
  • No Asym option
  • 120 degree x 120 degree

 

Pilot Graze Mini

  • 10 different beam patterns
  • Color changing and tunable white options (DMX controlled)
  • $85 DN per foot

Pro Spot Flood

  • 5", 9", 17" apertures
  • Quad or Tri chip available in this product too
  • Many beam spread options
  • Optical Kit is also available
  • Visor and Snoots available
  • Heated Lens option
  • Can be pendant or wall-mounted as well
  • IK07 and 3G Rated Products


Space

  • $100 DN Per foot
  • RGB Tri-Chromatic (DMX)
  • White Static Shown (0-10V)
  • Continuous, 90 degree, T shape
  • Direct and Indirect
  • 6W down, 3W up
  • 1' Increments
  • Batwing lens available for the top
  • Max 12W per foot
  • Surface mount option coming soon


*Smaller Profile Medley Products launching next year

*Medley In-Grade: Every aspect of the fixture is IP68 Rated

10Jul/190

Tivoli

New Adapt Drop line is a catenary based line.

24" , 36" , 48" O.C.

 

Shatter-resistant glass globes:

Black cable only

1W source

Adapter kits and shades available for different products.

Shades will not make things dark sky compliant, however.

$25/ft

They also have smaller polycarbonate options.

120V corded version is available. Brighter output and comes in specific lengths.

Tivoli provides aircraft cable, clips, and any other mounting accessories.

 

New sconce coming out- The Aurora:

It is line voltage so TRIAC dimming is required.

Shown is 1 of 4 patterns. You can also print your own pattern.

3000K is the only CCT offered currently.

Available in 9"-4' heights.

$350 DN for 1' sconce. $650 DN for 4' sconce.

 

Node Fixture:

24V

RGBW

Outdoor rated

485 Lumens/ft. at 4" center

Used for Wall Washing or Grazing

RGBW Quad Chip

 

Linear Product:

Individually addressable per chip

RGB

Smart Pixel Database

4.5W/ft.

.66" cut increments

Very tight pitch

Smart Pixel Interface - reduces the number of leads to 3 and runs up to 20'.

$85/ft DN

1" spacing from tape to lens required to loo smooth and diffused.

 

They also make a stage edge fixture that is flexible and can take roll overweight. It also has stage edge indicators.

10Jul/190

Gantom

Gantom specializes in small DMX controllable spotlights.

All products are IP65 rated however, there are specific coatings to make outdoor fixtures wet listed.

They work with Rosco to have 19mm gobos.

Internal driver - data line to it

1W-7W range although 3W-5W is the typical fixture in the range.

Quad chip

They do custom products

Products have a nice, tight beam. No lenses are interchangeable in the field, but diffusers are available for in-field application.

Downloadable app for control.

RDM box coming next year.

$60-$175 DN range

$380 DN

Most products are in stock so that things can ship quickly.

22May/190

LIGTHFAIR 2019

ACCLAIM:

We liked the dome series.

 

ACCORD:

15 days lead time. Made in Brazil.

\

AION:

0.5 inch by 0.5 is the smallest channel with screws in the end-cap. It goes down to 1/4" increments and over 8ft is available as one piece.

3/8” wide 800lm/ft 30, 40, 60,80 degree optic available. Node free on full and mid. Minimal visible node on a low level.

1/4” deep, 400lm/ft, node free

Variety of channels, walk over mud-in closet rods, shelves, recessed and surface mount all available.

AVENET:

Cool looking pendant.

BASELITE:

We liked the finish and textures that look like ceramic.

B-K LIGHTING:

Liked the new finish.

 

DAY TIME:

Interesting looking light panels.

 

DECORS:

Round fixture looked good. Acrylic all around.

 

ECOSENSE:

New ELV Dimming. 3 and 3.5”

  • Fixed and adjustable wet location fixture.
  • upgradable to tunable, Bluetooth controllable.
  • Field replaceable optics

 

ELLIPTIPAR/TAMBIENT:

New sconces and wall washers were shown.

 

KUZCO:

We really liked the forms and designs.

 

Interesting glass wet listed sconce:

 

LIGMAN:

 

 

LUCIFER:

48v tracks recessed, trim and trimless

Step lights:

LUMIUM:

Wood finishes for linear and new profiles:

New slim direct/indirect pendant mounted fixture. Lumium also had a new pendant mounted oval fixture.

 

MODERN FORMS:

Lightstick is a nice looking dropped lens fixture. Probably a good option for vanity lighting. But it's only available in 3000K.

 

MP LIGHTING:

Good Mono-point options.

NEOLIUM SMART:

 

OXYGEN:

Another lensed linear option but available only in 3000K.

PHILIPS/SIGNIFY:

Liked the mounting options.

PICASSO LIGHTING:

Had a nice wrap around lens.

SONNEMAN:

STRUCTURA:

 

VLT:

Custom fixture attached to hardware. Direct/ back light to a cove.

Globe mounting bracket for the light available as a pendant too! Globe, in the ground, spotlight.

  • General 5-6 weeks lead time
  • Linear products are made to order.
  • Different lenses, opacity, remote power supply.
  • A great option for shelf lighting, available in warm white and grazing.

Brand new step light, Corian face plate different colors, interior rated, different shapes, junction box with internal driver.

 

WAC LIGHTING:

 

 

 

 

8May/190

Tokistar

Today Tokistar visited the office. 

First they showed us fixtures from the Gradient Series, starting with an indoor 3 degree beam surface that can be recessed or surface mounted. This is a 2W fixture that is approximately $200 DN.

They also had an outdoor 3 degree beam that is good for walls and columns. Also comes in an asymmetric version. This fixture is IP66 rated, 0-10V, and approximately $375 DN.


Wall Grazer has a nice tight beam. Can also come with a shield.


8 Degree sections can come with a hexcell louver or a hood. Indoor and Outdoor versions available.


Track can adjust each head to its own intensity with a magnet. There are 6 intensity levels. The whole track can be dimmed. Available in both black and white finishes.


TokiLinear: Shipping complete until up to 8' with ETL label.


We also looked at an RGB fixture that can be controlled manually or on a 0-10V system for dimming.


The Exhibitor (festoon lights) comes with different shades and many different mounting options. Custom heads can be made. Fixture is rated for wet locations.


We were also given catalogues for Omnify and KLUS.

13Mar/190

LEDucation


SDA

CORONET:

  • New Black Lens so fixtures are quieter looking (50% LLF)

DAY-O-LIGHT:

DESIGN PLAN:

  • Now has IP69K rated fixtures (which are rated for power washing)

ECOSENSE:

  • New LORE downlight
  • Interchangeable optics (beam spread) the modular with
    10°, 20°, 60°, and pinhole options.
  • Now also owns Lumium
    • $70 DN for bracket fixture

ERCO:

Right side: Standard wall-washer
Left side: Wall-washer for a high ceiling.
  • They use the OSRAM LED chips with 97+ CRI
  • Rearranged LED chips to achieve a round beam spread
  • New Atrium downlight for high ceiling available as up/down distribution. It offers a quit ceiling.

Zoom fixture: 70° to 15°, also available in oval shape beam spread from 7°.

FENG SHUI LIGHTING:

FORMA:

  • Works with Cassambi

HEVI-LITE:

  • Single diode instead of triple diode now
  • Acrylic fixture has stake mount and pendant mounting options and comes in smaller sizes. Can customize the size of the diffuser.

H.E. WILLIAMS:

INTENSE:

LEDCONN:

  • Luxflux
    • Field cuttable
  • Backlighting
    • 1.5” spacing from acrylic

LIGHTGLASS:

  • Mimicks daylight
  • Cannot see through it

LITELAB:

  • Next Gen cylinder and track available now

LUMENPULSE:

  • There are new mounting brackets and visors available for the Lumenfacade fixtures

LUMINII:

  • Now have High-Efficacy options
  • Part of leader brands: also available in 16".
  • Matrix and Matrix Plus
    • Come in 12x12 or 2x12 options
    • 134lm/w, back lighting solution 2x12

MARK ARCHITECTURAL:

  • Chisel Fixture
    • Comes in Warm Dim, Statics White, or Tunable White
    • $300 DN for tunable white fixture

MODERN FORMS:

  • They also have ceiling fans

NOVA FLEX:

  • 1-inch pinch custom size up, up to 4 ft
  • Nova flex is a great option for low cost and acceptable quality fixtures.

SELUX:

  • The hex cut around 45% of light
  • Available in different configurations as down, up, and up/down.

USAI:

  • New sloped ceiling options
  • 6.5” housing options
  • New Armstrong ceiling tile fixture

US ARCHITECTURAL LIGHTING SUN VALLEY:

  • Good heat dissipation

WE-EF:

  • New post tops

LIGHTS ON WEST

B LIGHT:

LEDNER:

LUMENTRUSS:

  • Pre-made coves
  • Wooden fixtures

LOUPI:

  • 24V Track

ONE A:

  • One mounting ring that fits everything
  • Interior Only
  • Back mounted ring for millwork
  • Remote drivers that dim to 1%
  • Using SORAA
  • Higher price point

STENG:

  • New picture/Art Light

DULANSKI

NUMBER 8:

  • The new 200 series with competitive pricing (under $200), more output compared to 400 series coming in July.
    • mud in option comes soon (5 to 6 months).
    • Color tuning coming soon in all series (2 to 3 months).
    • $180fix + $20 extra for warm dim 30° adjustability, over 18 different optics.
    • IC housing is $20 adder.
    • Color tuning is around $50 adder.
    • Soraa lamping
    • 2.5 inch deep, a solite lens, wet location.
    • Luminet lens glass with optical potential for linear spread.

PRUDENTIAL:

  • Can light a whole ceiling and is clear when off

SCOUT LIGHTING:

  • 0-10V Dimmable
  • Cuttable to the inch
  • Comes pre-assembled
  • $40 DN/ft.
  • Have a 10 x 60 Grazer

O'BLANEY RINKER

BACKLIGHTING SOLUTIONS- EVOLITE:

  • Lattice
    • Screwed in rather than tension mount like TLS
  • Origami
    • Can lay things right on it
    • IP65 Rated (maintains rating when cut)
    • 866 lumens/sq. ft.
    • 12W/sheet

DADO LIGHTING:


Smallest is 6" but they can do a longer one.
  • Braille printed on the lens

EKLIPSE:

  • New Cipher System (fall product)
  • Adjustable every inch
  • Depth less than 3/8” required

LUCENT:

  • Beam control expanded the range in added sizes.
  • Mini800 lm
  • Micro 550lm ( good for display lighting)
  • Snap-in track
  • Dali- 0-10 lutron
  • A new range of LED module
  • warm dim and tunable white
  • chip onboard
  • 0-10V, EcoSystem, and Dali controls.
  • Down to 2000k on 1%
  • The mini trim cut the price and make it a competitive option

OPTIC ARTS:

  • New flexible outdoor FOT options (what does FOT mean?)
  • New fully flat lens

ROSCO:

  • New Optisculpt line

ELS

A LIGHT:

  • Available in 24" and 38" diameters. 8500lm for 38" model.
  • Remote driver in the canopy.
  • There are lines on the shiny finished surface but having a matt finish prevents that.

A fixture made out of nonorganic material (no mold). It is cleanable, vacuumable, recyclable, and printable.

PURE EDGE:

The 24v track heads also available in the warm dim.

TLS:


PYRAMID LIGHTING:

NERI:

Exterior fixture made from concrete fiberglass.

It has a nice horizontal distribution. Built based on the Florida code requirement. available with switching between amber color and standard white.

There is no shadow of the bracket on the surrounding. The blade part can be used to have signage and pattern since the light is thrown out from sides.


ELA

3G LIGHTING:

In RMZ Series the 2 micro LED is around $150 and $250 for 4 micro LED models. Available in timeless with integral driver recessed option

DL33R Downlight: Right side can be considered as an efficient fully adjustable/ flush option around $150 to $175.

AURORA LIGHT :

  • Symmetric and asymmetry distributions.
  • New wood bollard
  • New 3w basic flood light interchangeable optic no accessory, available in 15 20 40 50 degree optics. Using new silicon lens offer 15% optical output comparing to acrylic.
  • Walli family now have wall-washer option,110 degree 120 and 130 degree optic
  • They stoped sainless steel finish and intrediuced new PVD black finish

LF ILLUMINATION:


SLS

FLUXWERX:

FOCAL POINT:

  • Skydome is an edge-lit fixture with optional uplight.
  • The pendant mount comes with separate control for up and down individually .
  • available in 2',3', and 4' (18000lm) diameters.

SORAA:

5Mar/190

WE-EF

Today, We-ef stopped by to present their updated exterior pole lights and bollard light.

They presented the Flood-light, FLC 230 model, the second smallest in this family. It has a powder coated graded aluminum body with 4 standard colors; Black, white, grey, and dark grey.

The flood-light family has a wide range of beam spreads, 5.8, 8.2, 14, 30, and 60 degrees.

The lensing is designed as a tray of individual lenses and is field replaceable and sits right on top of the LED board without having to glue it.

The fixtures can accept up to 2 internal accessories. a snoot and a hex louver which seats on top of the snoot without cutting off too much light.

The Smallest of the family is 7.5”, FLC 220 (7.97" diameter).

They also have a linear spread lens accessory. A great option for pedestrian and pole lighting.

The linear spread lens can be used with Hex louver.

Available in 3000K and 4000K are standard static whites. The 2700K, 3500K are new additions.

This fixture is also available in tunable white (2700K-6000K) as FLC 220-TW family.

The 5.8 degree spread has a different LED board.

30 degree + hex is around $1200 DN

30 degree + linear spread (presented)

larger size fixture has DN price of $1800

One of the great features of this fixture is modularity and control of the beam angle.

Comes in static white, warm dim, and tunable white.

30Jan/190

Acrosentec

Acrosentec visited the office today.

Acrosentec is based in Hong Kong but they also have an office in Nevada.

They have a museum grade product line and are very open to making custom fixtures. All of their products are 2000K-4000K and 97-99 CRI. Their products are frequently used in high retail and hospitality.


DPB

The DPB is a low profile fixture. It has a double row of LEDs, and appears almost nodeless. 1/2" LED increments. Also comes in a pendant mount version.


MPB

Very small extrusion. IP 67 Rated.

Also comes in a pendant mounted version as shown below:

20 x 90 Lens with striations:


Mosaic

Edge-lit tile. This tiles fixture would have a diffusor as well.


QPB

The QPB fixtures are RGB and RGBW.


*Acrosentec makes their own extrusions.

*All products are constant current.

*Products are currently UL Listed.

*2 week lead time is standard.


24Jan/190

Bartco

Bartco stopped by our office today to present their updated products.

The Horizon

A linear illuminated coffer fixture from the reflected light series with 3-3/8" square housing and 2" visible illuminated aperture, snap-in system, max 1000lm/ft light output. It is available in warm dim and tunable white.

The Nippo

A semi-recessed surface mount fixture with integral driver (0-10V down to 1% dimming), 90 CRI.

Wedge BSS750

We have seen a new corner mount fixture with 2 illuminated surface, great for a staircase and perimeter lighting. The fixture has a 3"X3" housing, available in 3000K, 3500K, and 4000K. The corner mount fixture comes in up to max 8' section of lens as standard but can be ordered in 10' max a custom.

------------------------------------------------------------------------------------------------------

From their BSW family, the exterior products with IP68. The finish is powder coated with a printed image or pattern. The texture is available as an option. They offer 7+ years warranty for outdoor use.

This following is an up/down fixture with RGB as an option for the uplight section of the fixture. The downlight is still white.


Follow on Feedly