Illumination WALD STUDIO

30May/180

PAL Lighting

They brought some of the new linear products to the office today so we can take a closer look.

Microlinea Series

A linear LED family with 3 category. The series 2, series 3 and series 5 corners are available in nominal 2’ x 2’ long continuously lighted configurations and 90° corner configuration, die-cast aluminum end caps. They are available in High output (28W for 4' ) and Mid output (19W for 4') power, 80 and 90CRI, CCT of 3000K, 3500K and 4000K. They have used perforation pattern in their updated products to secure the flangless designed fixtures's lens against cracking, twisting and bending on long run.

Another  product in this family, Microlinia series 2 has an extended accent lens over the housing. Direct, direct/indirect, wall and ceiling mounting, up to 116 lm/w. It is available in 2',3',4',..,12' runs.  come sin 3 sizes. 2', 3' and 5'. with any pattern or angle.

The 2" model has an integral driver, Osram LED, and emergency lighting battery. The wet listed extrusion version comes with a cast ending,

  

 

Microquad Series

Direct, Indirect/Direct Suspended LED fixture. It comes in 2’X2’ (98W), 3’X3’ or 4’X4’ (238W), standard and premium finishes, CCT of 3000K, 3500K, and 4000K. It comes with factory programmed driver (Osram, 0-10V)

  

 

AR300 

The slender shape LED fixture lighting. It comes in 12' long, integral driver and direct and direct/indirect distribution with suspended, wall and ceiling mounting. It is also available in tunable white form 2700K to 6500K, flap and sculptured end cap.

Custom color finish per request.

  

 

27Jun/170

DMF Lighting

DMF Lighting is a downlight company based out of California. They have based their company similarly to a tech company with the use of parts and pieces that can be combined to make multiple downlight styles. One of the main highlights of their downlights is that for the lower outputs, the driver is integral to the LED module. They have a standard CRI of 93 across the board. They also use the same chip in both their low and high output fixtures so the color matches throughout. The distribution of light is a basic blob of light with a 120° beamspread and a smooth beam and no harsh edge.

The OneFrame fixture is a unique downlight in that it is equipped with a small housing which is IC rated and fireproof for up to 2 hours.

There are a series of different trim options to choose from starting with a bevel round and bevel square trim. The square aperture has an 18% light loss due to the design of the module relative to the opening. DMF also has developed a set of acrylic dropped lens trims; one with a frosted ring and frosted center, a frosted ring and clear center, and a frosted ring and open center. We took a look at the acrylic ring and it did a nice job of pushing light up higher on the wall. It would be a good option for corridors if there was an interest for a decorative element.

The original downlights that DMF started with have a 4" aperture, however, they are coming out with a 2" aperture version with a remodel housing. It is wet listed and offers 13°, 25° and 40° optics.

The standard downlights are reasonably priced with the low output coming out less than $100 DN. It would be a good option for corridors and closets or other projects with budget restraints looking for a basic downlight. Because the components are all able to work together depending on the configuration, DMF stocks their parts in their warehouse in California and are able to ship within 24-48 hours.

15Jun/170

Ledi Lighting

Ledi Lighting is a Houston-based family lighting company specializing in LED tape and channel lighting.  Their products are manufactured in both Houston and overseas.

The Inspired Series features a 12 mm wide LED tape light, it is the first coated, cuttable, and reconnectable LED tape light. It comes in a variety of colors from 1800K to 4000K.

Ledi has it's own patented connector called the Zeus.  which allows the product to be cut at every 4 inches and reconnected back seamlessly to limit waste with a secure connection.

The Nano SKN is damp rated.  The High Brightness is priced at $19 per foot, and the Regular Brightness is priced at $10 per foot.

The Nude is dry rated.   The High Brightness is priced at $10 per foot and the Regular Brightness is priced at $5 per foot.

Both the nude and the Nano have an RGB option.

Their outdoor product has a rubber mounting channel that can be can be attached to any surface using screws or construction strength glue.

Lead time for the tape light is 2 days.

Quantum is their channel linear diffuse fixtures that can be recessed, mounted or suspended

They carry a squared, circle, trapezoid, angle and recessed channel.

The product ranges from 2400K - 4000K

Aircraft cable is used for their suspended fixtures and they can powder coat the flange to any color.

Lead time for Quantum is 2 weeks.

All their products come with a 5 year warranty.  Because Ledi pride themselves on service, they have a team that can help calculate any design needs with the product as well.

   
Follow on Feedly